Here are my questions:

1. AGA & both Video output (RGB & DIGITAL-VIDEO) are working?

2. Can i Flash the Firebird like the Vampire?

3. Are the SAGA-Driver the driver or do i need other drivers?

4. For what are the SP1 and 12S-Port for? Can't find any Informationen about that at apollo-accelerators.com.

5. Is the JTAG-Port like the same on Vampire V500 V2.2 or do i need a New cable?

6. I use coffin with latest Saga-Driver for Vampire V500. Can i use this System with the Firebird or do i need a clean Installation?

Thanks for help :-)

Sure let us answer your questions.

Patrik Rendel wrote:

Here are my questions:     1. AGA & both Video output (RGB & DIGITAL-VIDEO) are working?

Yes you have video out on the Amiga mainboard and also Video out on the Firebird card. The Video out on the Firebird card does support, clone the Amiga signal, display AGA (run Aga games), and truecolor modes

Patrik Rendel wrote:

2. Can i Flash the Firebird like the Vampire?

Yes you can flash it from CLI and with USB Blaster.

Patrik Rendel wrote:

3. Are the SAGA-Driver the driver or do i need other drivers?

If you run ApolloOS or Coffin or Emutos (Atari) then drivers are included. If you use another OS then you need install the SAGA drivers.

Patrik Rendel wrote:

4. For what are the SP1 and 12S-Port for? Can't find any Informationen about that at apollo-accelerators.com.

The SPI port is an expansion port. Its for future expansion.
The i2S port is an audio out port, it is an additioanl option to connect your system to a Hi-Fi

Patrik Rendel wrote:

5. Is the JTAG-Port like the same on Vampire V500 V2.2 or do i need a New cable?

Its the same you can use your existing Blaster

Patrik Rendel wrote:

6. I use coffin with latest Saga-Driver for Vampire V500. Can i use this System with the Firebird or do i need a clean Installation?

Coffin runs fine on the Firebird. You can use it.

Kind regards
Gunnar

Patrik Rendel wrote:

Is the video output from RGB and DIGITAL-VIDEO possible via DIGITAL-VIDEO even if I'm not using AGA mode, or do I have to use AGA mode for this?

You see OCS games on both ports at the same time.
On the Amiga 500 port and on the Digital Video out.

Here you can see the Amiga 500 + Firebird and 2 Monitors in parallel.

Big Thanks for the explanation.

Do i need to change anything for full video output on DIGITAL-VIDEO or do i need to install and configure something special and if yes, what i have to do then?