|
---|
| | Pascal Babel
Posts 37 08 Jul 2020 22:15
| Hello, I have a 4XEIDE card connected to the IDE port of my Amiga 1200. When I try to install the software for the different readers, the CF with the latest system available for the vampire V1200 will not be recognized. Is there a compatibility problem between the 4XEIDE and the vampire? Thank you
| |
| | Andrew Miller
Posts 352 08 Jul 2020 23:19
| If the V1200 has the core it came with, you will need to use the V1200 IDE connector, if you have updated to the latest version it should be the motherboard one, if so try the CF card directly to see if it boots.
| |
| | Henrich Raduska
Posts 62 09 Jul 2020 07:04
| The right question and the completely wrong answer. The question is about "Idefix" compatibility.
| |
| | Smartroad 78
Posts 116 09 Jul 2020 08:26
| Henrich Raduska wrote:
| The right question and the completely wrong answer. The question is about "Idefix" compatibility. |
He suggestion was first to see which port is active, the A1200 internal or the Vampire's. Given that no details about core version, I'd say it was a fair response go start with.
| |
| | Andrew Miller
Posts 352 09 Jul 2020 11:36
| Henrich Raduska wrote:
| The right question and the completely wrong answer. The question is about "Idefix" compatibility.
|
If its about the IDEfix software, then as far as I know its not needed. But as worded it sounds like the device is not working.
| |
| | Pascal Babel
Posts 37 09 Jul 2020 21:33
| Hi, I am using the latest firmware and OS. So the EIDE is connected to the IDE port of the amiga. If I try to use the 4xEide V4.7 software the amiga 1200 does not start.
| |
| | Andrew Miller
Posts 352 09 Jul 2020 23:24
| Does it work without installing the EIDE software?
| |
| | Artur Jarosik (Apollo Team Member) Posts 94 10 Jul 2020 02:06
| 4xEide works with V500 for me.
| |
| | Pascal Babel
Posts 37 10 Jul 2020 13:07
| Yes without 4xEIDE it works. If I activate the line in the startup-sequence the amiga starts but the OS does not load completely. So I think it's a software problem. I will try installing a WB 3.1.4 to see if it work. If this is the case, the problem comes from CoffinOS
| |
| | Pascal Babel
Posts 37 23 Jul 2020 15:35
| 4xEIDE works fine with 3.1.4 OS, so coffin have a bug for it.
| |
|