Help Yellow Screen With Vamp Installed | |
---|
|
---|
| | Adam Whittaker (Needs Verification) Posts 270/ 1 10 Aug 2019 13:07
| My old 600 wont work no more so i sent it for a recap, it came back and its not working at all so i found a working system in good condition but with my vampire installed i get a yellow screen and it wont go aby further... i can hear and audio glitch repeating in too. I really am at my wits end any gelp guys? I have 3 amiga 600s and cant use Ny of them with my vamp!
| |
| | Pedro Cotter (Apollo Team Member) Posts 308 10 Aug 2019 14:22
| If you have expansions like ram or other connected, try without them...
| |
| | Adam Whittaker (Needs Verification) Posts 270/ 1 10 Aug 2019 15:42
| hiya - ok tried that still exactly the same, also cleaned cpu pins and cpu socket with isoprop and a Qtip any other ideas?
| |
| | Adam Whittaker (Needs Verification) Posts 270/ 1 10 Aug 2019 18:18
| ok after updating it using my usb thingy to the 2.12rc i am getting a green screen... any ideas?
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 10 Aug 2019 18:34
| Probably your V600 CPU socket connector has gone kaput. You could try to forcefully press your thumb over the CPU socket when turning on the A600 power.
| |
| | Adam Whittaker (Needs Verification) Posts 270/ 1 10 Aug 2019 18:38
| its recently had a new socket fitted as the old one had become so loose it wouldnt hold on i will try holding my thumb over it but i dont think thats the problem. i will report back. Yea just tried held down so hard its marked my hand and its still the same.
| |
|