|
---|
| | Jonny Pulli
Posts 50 14 Jul 2018 18:51
| Hi my second post here... I have now the card! :) I thought it can transfer files from the PC to the SD card and use the card in the Wampire!? But it does not ... anyone can help? Poor english here... From Sweden.. /JonnyEDIT: i have no working discdrive, cant get my Nullmodem to work! Will have internet.. maybe next week, but i want to copy amiga stuff to the SD Card from the PC, i have a lot of stuff there! So please help!
| |
| | Kresimir Lukin
Posts 65 14 Jul 2018 19:57
| make partition of 2GB max on sd card, and it will work Also you must have installed fat support. if you use coffin then you have everything already installed.
| |
| | Jonny Pulli
Posts 50 14 Jul 2018 21:30
| Hi why just 2 GB? i have a card of 64 GB... So if i give it Fat support will i still be move stuff from the pc to the SD card..? Or can i make a 2 GB partition whit fat support on the card..... And i use Coffin....
| |
| | Vojin Vidanovic (Needs Verification) Posts 1916/ 1 14 Jul 2018 21:36
| You could use Internet, RDesktop EXTERNAL LINK or FTP connection. Its possible to use FAT32 ----------------------------------------------- Download fat95 EXTERNAL LINK SD0 is part of SAGA drivers. Use this nice advice, if you wish to us the card just for data transfer. Single FAT32 partition as best. Format your SD card on PC to FAT32 fileformat in normal way. Do not use any Amiga tools like HDToolBox, SDMount or Giggledisk. Make sure you have: DEVS:sagasd.devive (v0.9 05/05/2016) L:fat95 (v3.18 03/01/2013) DEVS:DOSDrivers/SD0 DEVS:DOSDrivers/SD0.info Make sure that your DEVS:DOSDrivers/SD0 mountlist uses partition geometry autosense, its contents must be like this: FileSystem = l:fat95 Unit = 0 Flags = 0 LowCyl = 0 HighCyl = 0 Surfaces = 1 BlocksPerTrack = 1 BlockSize = 512 Buffers = 20 BufMemType = 1 BootPri = 0 Stacksize = 4096 Priority = 5 GlobVec = -1 DosType = 0x46415401 Device = sagasd.device
| |
| | Jonny Pulli
Posts 50 14 Jul 2018 22:13
| Ok thanks, im not a expert in this, i just belive that the SD Card port would support data from PC copy type to work, I have a Indivision card ACA 500 plus, there it is easy way to copy stuff from the PC to that card, and then install them to the Amiga, in my case a AMIGA 500 :) I Will try your idea! :)
| |
| | Jonny Pulli
Posts 50 15 Jul 2018 11:47
| Jihha It works! :) Thanks for help!
| |
| | Vojin Vidanovic (Needs Verification) Posts 1916/ 1 15 Jul 2018 14:18
| Jonny Pulli wrote:
| Jihha It works! :) Thanks for help!
|
Glad about it. Well, FAT32 support is quite long time with us, but as user contribution. Sadly, due to AmigaOS troubles, it has never became part of OS. Similarly, there is no one to oficialy add NTFS or EXT4 and it is not there out of box even on "AmigaOS 4.1.8+Enh 1.3"
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 15 Jul 2018 14:22
| This was typo on my original post. Better to use: Buffers = 300 Otherwise it is slow as a dog.
| |
| | Vojin Vidanovic (Needs Verification) Posts 1916/ 1 15 Jul 2018 14:37
| Simo Koivukoski wrote:
|
This was typo on my original post. Better to use: Buffers = 300 Otherwise it is slow as a dog.
|
Thanks Simo, also for original advice Yup. Its 2018 and we have to add buffers by hand to cache disk transfers ...
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 18 Jul 2018 05:56
| Riva Playback Test From uSD Card: EXTERNAL LINK
| |
|