One early procedure could be : 1/ Download GiggleDisk EXTERNAL LINK Copy Bin/GiggleDisk_AOS68K to C:GiggleDisk ---------------------------------------------------- 2/ Download the beta SD driver EXTERNAL LINK Copy only needed stuff a) C/SDDiag to C: b) Devs/sagasd.device to DEVS: c) System/SDMount to SYS:System ---------------------------------------------------- 3/ Insert your SD and Check it a) Open a CLI b) Type >C:SDDiag If it detect your SD without error, then you are all good. ---------------------------------------------------- 4/ You can create your partition(s) now a) Change the Tooltype of your SYS:Tools/HDToolBox to SCSI_DEVICE_NAME=sagasd.device b) Do what you need in HDToolBox and save to disk. ---------------------------------------------------- 5/ Open Workbench:System/SDMount This is a script, so a) DoubleClick on it from WB b) Or from CLI >execute SDMount This script runs GiggleDisk which is a tool that examine the Disk Geometry of your inserted SD card. Once executed, GiggleDisk has created one or more 'mountlist' for you in RAM:T/SDMount There is normally 1 mountlist per partition. c) Open it (or them) in a Text Editor and Modify by hand the "FileSystem line" as follows : FileSystem = L:pfs3_aio-handler FileSystem = L:FastFileSystem FileSystem = L:SmartFileSystem or such... depends what you configured in HDToolBox (see step 6). d) Save your mountlist(s) and place in your DEVS:DOSDrivers/SD0 ---------------------------------------------------- 6/ Reboot ---------------------------------------------------- 7/ You should see on WB desktop the partitions as NON DOS. Just format them with WB format in QuickFormat mode. ---------------------------------------------------- 8/ You are ready.
|