Overview Features Coding Performance Forum Downloads Products OrderV4 Contact

Welcome to the Apollo Forum

This forum is for people interested in the APOLLO CPU.
Please read the forum usage manual.

All TopicsNewsPerformanceGamesDemosApolloVampireAROSWorkbenchATARIReleases
Information about the Apollo CPU and FPU.

ApolloOS R43 and Vampire Boot

Carlos Paramio

Posts 2
14 Aug 2017 22:27

Hi there. I hope you can help me to solve this mystery with the booting process of ApolloOS from an SD card installed at the Vampire V2 using Vampire Boot at a Compact Flash.

I followed the steps at the tutorial 1 of the Vampire Boot repo (https://github.com/henrikstengaard/vampire-boot) in order to prepare the HDF image with the Workbench required files, using UAE. Then I dumped the HDF image into a Compact Flash connected to the IDE port through an adapter, and a Sandisk 64GB SD card with ApolloOS image r43 dumped to it using Etcher for OS X (I previously tried with a Sandisk 32GB SD card, but Etcher told me that the 32GB image couldn't fit... it sounds like it wouldn't for a few thousand bytes.

Then, when my Amiga 600 boots with my Vampire V2 on it, I can see the menu that appears at step 6 of such tutorial.

The problem starts when I start with Tutorial 2 and click on "Build mountlist". As soon as it runs, I get the following error:

ERROR: Unsupported dostype DosType = 0x50445303 QUIT failed return code 20

and I don't know what else I could do since there isn't any list of possible common issues one could find. Does it ring a bell there? Thanks.

Picture of the error: EXTERNAL LINK

Michal Warzecha

Posts 209
15 Aug 2017 13:46

**Note: If build mountlist is used in an emulator, it requires chipset extra is set to A600/A1200 and HD controller is set to A600/A1200/A4000 for GiggleDisk to properly detect partitions.**

Did You do this?

Carlos Paramio

Posts 2
15 Aug 2017 20:32

No, because I don't run "build mountlist" on the emulator, but on the real machine. I only used the emulator to prepare the VampireBoot.hdf file with the required system files from Workbench, and that worked fine because otherwise I wouldn't be looking at the menu where the "build mountlist" option is :-)

posts 3