I'm trying to update my V600 over USB Blaster to the Gold 2.12. It will always stop at 12%. I really don't know what i'doing wrong. Help me pls. It's all connected well. Here the log from Quartus Info (209016): Configuring device index 1 Info (209017): Device 1 contains JTAG ID code 0x020F40DD Info (209007): Configuration succeeded -- 1 device(s) configured Info (209018): Device 1 silicon ID is 0x14 Info (209044): Erasing ASP configuration device(s) Info (209023): Programming device(s) Info (209021): Performing CRC verification on device(s) Error (209040): Can't access JTAG chain Error (209027): Verification failed for device number 1 Error (209012): Operation failed Info (209061): Ended Programmer operation at Wed Nov 25 17:52:22 2020
Posts 14 25 Nov 2020 17:36
I recognized now, that i have this problem only with 2.12 If I go back to 2.11 all works fine? Somebody same experience?
Posts 485 25 Nov 2020 17:53
If you can boot fine in 2.11 have you tried just doing a exe core update install from the Amiga shell?
Posts 14 25 Nov 2020 18:27
Yes i tried, and i got the same problem, like if i flash ober USB Blaster. It says flashing 100% successfull but it will not boot up. Shpuld i add something in my CF? or change something?
Posts 485 25 Nov 2020 19:18
Likely need to do the power modification to the capacitors on the V600.
Posts 14 26 Nov 2020 06:04
I solved it. The problem was I had to add the Setpatch in my startup sequence.
Posts 6 08 Feb 2021 03:33
I have a similar problem. I updated my 600v2 to gold2.12 using the USB Blaster successfully, but when restart, I get the vampire image with v2.12 at the bottom, but in the RGB I get nothing... it just stays there for ever. CF does not boot nor floppy.
I go back to gold2.11, everything works fine. Please help!
Note: how do you add the setpath in startup sequence when it does not even get to asking for floppy or tries to boot CF at all?
Note: will the capacitors solution work or what about using a more powerful PSU? (I just ordered one)