| GOLD3 Alpha Is Now Live ! | page 1 2 3
|
|---|
|
|---|
| | 
Andy Hearn
Posts 374
22 Sep 2018 21:11
| onpe, I don't kget it. I;ve clearly had too much Jack Daniels. I'm clicking that little red bar like its all I've got left in the world,. and gettin' nothing. probably for the best in this state. maybe I'll try again tomorow
| |
| | 
Vojin Vidanovic
(Needs Verification)
Posts 1916/ 1
22 Sep 2018 23:31
| Congrats, GOLD3 first sights!
| |
| | 
Sebastian Blanco
Posts 148
23 Sep 2018 04:15
| Tested the core and now i see why is alpha, the interlaced effect on the screen is very cool and i love how workbench look on the aga mode on the amiga.
Aga games and demos look great and smooth amazing work.When i looked at beta videos from the core i noticed the workbench was always at 640x200 now i can confirm that is because its the max mode available. I can set interlaced mode but its really interlaced. In my case using the audio from the hdmi spliter the volume is very low and sound very tinny. So much work must be done to get this things working fine 2.10 core is super stable and a very smooth experience fast and feature full. At least this alpha release will stop people from winning about "please let me betatest the core" all the time and give the team some peace. I will keep 2.10 in my case love to get a glimpse on the future :)
| |
| |
Vojin Vidanovic
(Needs Verification)
Posts 1916/ 1
23 Sep 2018 05:34
| Sebastian Blanco wrote:
|
I can set interlaced mode but its really interlaced.
|
Yup. Try dblPAL and dblNTSC :-)
| |
| | 
Haydar YÜKSEL
Posts 21
23 Sep 2018 06:05
| Vojin Vidanovic wrote:
|
Sebastian Blanco wrote:
|
I can set interlaced mode but its really interlaced.
|
Yup. Try dblPAL and dblNTSC :-)
|
dblPAL and dblNTSC not working
| |
| |
Vojin Vidanovic
(Needs Verification)
Posts 1916/ 1
23 Sep 2018 06:15
| Haydar YÜKSEL wrote:
| | dblPAL and dblNTSC not working
|
Thanks. It was a joke,since it gives higher refresh rate as opossed to interlacing. 640x200 was high res for A1200, stop whining!
| |
| | 
Stefano Briccolani
Posts 586
23 Sep 2018 12:13
| Have someone tried the v600 version of the core3 alpha?? Me and a friend have flashed the core and had the same problem: the system was unable to boot. It seems the core is unstable. Our v600 are both power fixed and have no problem running 2.10 x11..
| |
| | 
Bertold Mayer
Posts 1
23 Sep 2018 12:59
| Stefano Briccolani wrote:
|
Have someone tried the v600 version of the core3 alpha?? Me and a friend have flashed the core and had the same problem: the system was unable to boot. It seems the core is unstable. Our v600 are both power fixed and have no problem running 2.10 x11..
|
I have the same problem. Core 2.10 x11 or x12 is stable. I have powerfix (2x47uF)
| |
| |
Sebastian Blanco
Posts 148
23 Sep 2018 14:58
| Its OK to launch games, but there a lot of stuff on coffin that don't even fit on the screen even dialogs from the prefs programs.
Will try overscan :DVojin Vidanovic wrote:
|
Haydar YÜKSEL wrote:
|
dblPAL and dblNTSC not working
|
Thanks. It was a joke,since it gives higher refresh rate as opossed to interlacing.
640x200 was high res for A1200, stop whining!
|
| |
| | 
Estrayk / PaRaDoX
Posts 21
23 Sep 2018 19:12
| Bertold Mayer wrote:
|
Stefano Briccolani wrote:
|
Have someone tried the v600 version of the core3 alpha?? Me and a friend have flashed the core and had the same problem: the system was unable to boot. It seems the core is unstable. Our v600 are both power fixed and have no problem running 2.10 x11..
|
I have the same problem. Core 2.10 x11 or x12 is stable. I have powerfix (2x47uF)
|
same here. Seems doesnt work in v600
| |
| | 
Przemyslaw Tkaczyk
Posts 155
23 Sep 2018 19:51
| I got it working on my (unmodded, mind you) V600, but it takes a little patience. Sometimes it boots right away, however sometimes it requires a few power on/off cycles to "click". Once it's live it seems quite stable. Don't know why this is the case for V600, but don't give up just yet :)
| |
| | 
Aleghid V4/1200
Posts 26
23 Sep 2018 20:26
| this core struggles to start. I would say 10% of the ignitions work. Vampire 600v2 Gold 2.10 x12 perfect working.
| |
| | 
Peter Foldesi
Posts 5
24 Sep 2018 18:51
| Same here. V600v2 starts 1 out of 100 tries.
V500v2 accepts the core, and starts fine.
... and interestingly my v600v2.1 died after flashing the core. :(
quartus says:Info (209060): Started Programmer operation at Mon Sep 24 19:50:07 2018
Error (209040): Can't access JTAG chain
Error (209012): Operation failed
Info (209061): Ended Programmer operation at Mon Sep 24 19:50:07 2018 So i'm a little bit confused now.
| |
| | 
Tim D
Posts 84
24 Sep 2018 21:34
| I guess we shouldn't just be testing AGA stuff right? While the hype is on "AGA on every Amiga", this core is simply the first that supports any native Amiga video mode, correct? So we should also check ECS and OCS games, shouldn't we?
| |
| | 
Renee Cousins
(Apollo Team Member)
Posts 142
25 Sep 2018 02:48
| Tim D wrote:
|
I guess we shouldn't just be testing AGA stuff right? While the hype is on "AGA on every Amiga", this core is simply the first that supports any native Amiga video mode, correct? So we should also check ECS and OCS games, shouldn't we?
|
Of course. ECS compatibility is a cornerstone of AGA.
| |
| | 
Eric Gus
Posts 476
25 Sep 2018 07:21
| Renee Cousins wrote:
|
Tim D wrote:
|
I guess we shouldn't just be testing AGA stuff right? While the hype is on "AGA on every Amiga", this core is simply the first that supports any native Amiga video mode, correct? So we should also check ECS and OCS games, shouldn't we?
|
Of course. ECS compatibility is a cornerstone of AGA.
|
Yea I plan on testing everything I can throw at it .. lol..
| |
| |
Stefano Briccolani
Posts 586
26 Sep 2018 16:11
| The v600 core is unstable. Almost every 600 have struggles with boot.. please put a working core so v600 owners can help in the aga debug
| |
| | 
Juan Jose
Posts 23
26 Sep 2018 20:59
| With the new core my Vampire 500 v2 + refuses to work with my Amiga 500+, neither does it with my Amiga 2000. With other cores I have no problem.
My vampire bought it from Majsta on eBay and has the new capacitors on.
The bug I detect is that it does not activate the hdmi output.
| |
| | 
Michael Nurney
Posts 283
26 Sep 2018 22:48
| Testing on my A600 and it sort of boots every 3rd or 4th try. It’s seems better if I enter early access menu but it always gurus after this , however the kickstart logo appears. However floppy access seems broken - it just clicks and stops. I haven’t tried ide yet , does that work ?
| |
| |
Przemyslaw Tkaczyk
Posts 155
27 Sep 2018 05:44
| Hi, Mike. Thanks for trying it out. IDE, onboard microSD and PCMCIA work perfectly. Floppy drive won't work in this core revision.
| |
|
