Hi all... My amiga600 don't boot the os 3.1 with the board... after maybe 15 sec. comes the os3.1 screen... Without the board the os works fine... It seems that the Vampire have a Problem with the ide port or the cf adapter... I have a ffs system... the green light is on and the red light on the board is working... It seems that the vampire is not damaged...but have a trouble with my cf adapter... I hope anybody can help me with this problem... And sorry for my english... Greetings from germany
Mirko Lange
Posts 16 06 Mar 2016 00:28
I have rev.1.5... Games and software works fine on floppy... but not the CF
Claudio Guglielmotti (Apollo Team Member) Posts 185 06 Mar 2016 13:10
Try with another compact flash. It seems a timing issue...
Mirko Lange
Posts 16 06 Mar 2016 15:03
Hi thanks for your answer... I have try this with 3 other cf's...all the same... I have 2 cf with speed 300 and 1 cf with speed 40 1: fresh os3.1 2: classic workbench lite 3: os3.9 Boing bag 3 I have seen that another User have written that the 2,5 cf adapter the Problem is... He take a 3,5 adapter and it works but this is a 40 pin connector...?! It is possible that the Filesystem is wrong... I have take the ffs... I will try it with another Filesystem like pfs or sfs...
Mirko Lange
Posts 16 06 Mar 2016 15:04
Maybe it can help... It was a Kingston cf...
Mirko Lange
Posts 16 06 Mar 2016 19:36
Hello... So I have my 128 mb cf card with sfs and classic workbench... And it works... Yeah... And here is another question... How it works with os3.9? Os3.9 is i think ffs or pfs... Is that right?
Claudio Guglielmotti (Apollo Team Member) Posts 185 06 Mar 2016 20:36
I don't know about wb 3,9. I do not like it.
About your CF, probably if you hardcopy the working compact flash over the non working you will fix the problem.
Mirko Lange
Posts 16 07 Mar 2016 15:48
I don't like it too... But is for me the easiest way to become a HD with more than 8 gb... I don't understand that with the patch...