The pin out is right there, printed on the module in the picture. And itís says itís a 5v module
Posts 21 22 Jan 2020 19:46
Yes it can be used with both 5V and 3.3V and Q3 means 3.3V
Posts 85 22 Jan 2020 19:53
Ah ok. See what you mean now. Given the device on the wiki uses a flat ribbon cable you should be able to see where those 10 pins connect onto your 12 pin device
Posts 21 22 Jan 2020 21:11
This is that what i did and dont work.
where is the problem to say what the pinout is from the new revision and why are there 10 pins if only 7 are in use?
Igor Majstorovic (Apollo Team Member) Posts 351 22 Jan 2020 21:29
Problem is that you need to wait for someone to reply to you and to resolve problem you have with the device we didn't recommend to use. I have no idea can that work at all because same chip can be interfaced by number of ways.
EDIT: I m trying to make some picture that could help you, pls be patient. EXTERNAL LINK
Posts 21 22 Jan 2020 22:31
REALLY BIG THANKS!!!!!!!!!
I got it now to work with your help and the pinout :) I write this text from my A500 now ;)
Igor Majstorovic (Apollo Team Member) Posts 351 22 Jan 2020 22:38