Hi, I have been reading the networking howto page EXTERNAL LINK and I am unsure of 1 thing. I have gotten the ethernet module and a cable for the vampire v2.2 500 and on the page I am unable to confirm which way the cable should be going around. For the 2.0 the pin out if shown and also on the silkscreen I can see which pin is pin 1, but for the v2.2 there is nothing on the silkscreen or on the page above saying which way the cable needs to go around. I am a little concerned that I may damage my vampire if the cable is incorrectly installed because the cable ends are on backwards or it improperly wired. If you can attach/update the wiki page so I can confirm the correct way around. Thanks in advance Gordon.
|