Hi, I have a Vampire 500 2+ and I have some issues with the stability of my network. I have connected the ENC28J60 after the instructions on EXTERNAL LINK and it kinda works, but after a while everything just stops working and I have to reboot to get the network working again - the machine usually doesn't crash but all network activity is frozen. I have tried with both the latest Roadshow (registred) and MiamiDX and they both behave about the same (Roadshow works a little better). I have tried setting a few different options in ENVARC:sana2/v2expeth.config but nothing really makes a difference, and I tried using shorter cables between the ENC28J60 and the vampire. I've even had a friend help me add 50k pullup resistors on the pins with 50k pullup remarks on the Wiki because I was unsure if that was needed - but it made no difference. Does anyone have any more suggestions what I could try? I'm using Workbench 3.9 and the latest core and have updated to the latest SAGA drivers. I'm not using any specific patches or such. Any ideas what could be the issue here?
|